A CETP, or Common Effluent Treatment Plant, is a shared industrial wastewater treatment facility that collects effluent from multiple units in one industrial cluster and treats it before reuse or […]
A sludge disc dryer is an indirect thermal drying system used to reduce moisture in dewatered sludge. It uses heated rotating discs inside a drying chamber to transfer heat into […]
A sludge drying facility is a complete sludge handling system used to reduce moisture in dewatered ETP, STP, CETP, municipal, or industrial sludge. It is not only a dryer. A […]
A sludge drying bed is a simple dewatering system used in wastewater treatment plants to reduce sludge moisture through drainage and evaporation. Wet sludge is spread over a shallow bed […]
A sludge dewatering machine separates water from sludge so the plant gets a more manageable sludge cake instead of a heavy, wet, difficult-to-handle slurry. It is used in ETP, STP, […]
Last month, a pharmaceutical facility in GIDC Vatva was issued a show-cause notice by Gujarat Pollution Control Board (GPCB) for discharging untreated effluent with COD levels exceeding 2,000 mg/L – […]
If you search “What is an STP?”, most websites will give you a textbook definition about “cleaning water.” But after 25+ years of designing and upgrading wastewater systems at AS […]
Zero Liquid Discharge, or ZLD, is an industrial wastewater treatment approach where treated water is recovered for reuse and the remaining concentrated sludge, salts, and solids are handled separately. In […]
Effluent treatment is the process of treating industrial wastewater before discharge, reuse, recycling, or zero liquid discharge. For a plant team, an effluent treatment plant is not only a compliance […]
Industrial sludge disposal is the controlled process of testing, classifying, reducing moisture, storing, transporting, and sending ETP, CETP, STP, or ZLD sludge to a suitable disposal, treatment, reuse, co-processing, incineration, […]
Wastewater automation is the use of sensors, PLC control panels, HMI/SCADA dashboards, alarms, interlocks, VFDs, dosing controls, flow meters and data logging to monitor and control wastewater treatment operations in […]
Sludge management is the planned process of collecting, testing, dewatering, drying, storing, transporting, disposing, or reusing sludge generated from wastewater treatment plants. For ETP, STP, CETP and ZLD plants, the […]
