Wet sludge drying is used when ETP, STP, CETP or industrial sludge remains too wet, heavy and difficult to handle after normal treatment. The goal is simple: remove additional moisture […]
A slurry dryer machine removes moisture from high-water-content slurry, sludge, paste, wet cake or filter cake and converts it into a drier, lighter and easier-to-handle solid. For many ETP, STP, […]
ETP vs CETP is mainly a decision between individual control and shared treatment infrastructure. An Effluent Treatment Plant is usually better for one factory with specific wastewater characteristics, while a […]
A sludge drying facility is a complete sludge handling system used to reduce moisture in dewatered ETP, STP, CETP, municipal, or industrial sludge. It is not only a dryer. A […]
A sludge drying bed is a simple dewatering system used in wastewater treatment plants to reduce sludge moisture through drainage and evaporation. Wet sludge is spread over a shallow bed […]
Last month, a pharmaceutical facility in GIDC Vatva was issued a show-cause notice by Gujarat Pollution Control Board (GPCB) for discharging untreated effluent with COD levels exceeding 2,000 mg/L – […]
