Sludge Dryer Sizing, Evaporation & TSDF Cost Savings Calculator
Calculate exact water evaporation duty (kg/hr), dry cake discharge, steam/thermal load, and annual hazardous waste TSDF savings before requesting an engineering proposal.
Process Inputs
Adjust parameters below to match your ETP, ZLD, or STP dewatering discharge.
Calculated Dryer Duty & Savings
Note: Preliminary sizing uses standard water latent heat + sensible heating factor (~685 kcal/kg evaporated water) and 1.28 kg steam/kg water evaporation. Final sizing accounts for sludge rheology, boiling point elevation, and MOC.
How Industrial Sludge Drying Mass Balance Works
Many plants mistakenly assume drying 5,000 kg of 80% wet sludge to 10% moisture removes 70% of 5,000 kg. Because solids remain constant while water changes, true evaporation is higher:
- Bone Dry Solids (DS):
DS = Wet Feed × (1 − Inlet Moisture). For 5,000 kg at 80%,DS = 1,000 kg. - Final Dried Output Weight:
Final Weight = DS ÷ (1 − Target Moisture). At 10% outlet moisture,1,000 ÷ 0.90 = 1,111 kg/day. - Water Evaporated:
Water = Wet Feed − Final Weight = 5,000 − 1,111 = 3,889 kg/day(194.5 kg/hrover 20 hrs). - Annual TSDF Savings:
(3.889 MT/day × Operating Days × TSDF INR/MT)directly eliminated from manifest weighbridge bills.
Get Exact Heat-Transfer Area & Turnkey Quote
Submit your calculated parameters below to receive an equipment GA footprint, steam/thermic oil header sizing, and budgetary offer from AS Engineers.

