FLAGSHIP OEM EQUIPMENT · AS ENGINEERS AHMEDABAD

Industrial Hollow Paddle Dryer for Sludge & Paste Drying

Counter-rotating hollow wedge paddles deliver high-density indirect heat transfer inside a compact jacketed trough—reducing ETP, ZLD, and chemical sludges from 80% moisture down to <10% without stalling in the sticky phase.

AS Engineers Hollow Wedge Paddle Dryer Twin Shaft Stainless Steel Assembly
INDIRECT CONDUCTION & SELF-CLEANING MECHANICS

How Wedge Hollow Paddles Conquer the 40%–60% Sticky Phase

Sludge does not dry linearly. Between 40% and 60% moisture, filter and centrifuge cakes turn into a cohesive, high-viscosity paste that bridges hoppers and coats flat heated drums. Conventional dryers need bulky external back-mixing loops just to prevent drive trips.

AS Engineers builds twin and quad-shaft Hollow Wedge Paddles that intermesh at slow speeds (5–18 RPM). Every paddle rotation compresses and relaxes the cake between opposing wedge faces, creating self-cleaning micro-shear while heating fluid (steam or thermic oil) flows inside the shafts, hollow wedges, and outer shell jacket.

  • Zero Direct Air Dilution: Heating medium never touches sludge; exhaust vapor is nearly pure steam.
  • 75% Smaller Scrubber System: Minimal carrier air slashes air pollution control CAPEX and fan power.
  • Closed Odor Containment: Negative-draft hood prevents VOC and H2S emissions around ETP zones.
Hollow Wedge Paddle Blades Self-Cleaning Shaft High Torque Gearbox for Sticky Sludge Paddle Dryer Jacketed Trough Fabrication at AS Engineers AS Engineers Paddle Dryer Inspection Floor
MODEL SERIES & EVAPORATION MATRIX

Standard Hollow Paddle Dryer Series (Custom Scaled to Plant Duty)

Wet feed capacities assume 80% inlet cake moisture dried to 10% outlet moisture using 6–8 kg/cm² saturated steam over 20 operating hours/day.

Model Tier Shaft Config Heat Transfer Area (m²) Water Evaporation (kg/hr) Wet Cake Feed (kg/day, 80%→10%) Drive Power (HP)
ASE-PD-08 Single / Twin 8 – 14 m² 90 – 180 kg/hr 2,300 – 4,600 kg/day 7.5 – 15 HP
ASE-PD-25 Twin Shaft 22 – 35 m² 260 – 450 kg/hr 6,700 – 11,500 kg/day 20 – 30 HP
ASE-PD-50 Twin Shaft 45 – 65 m² 550 – 850 kg/hr 14,000 – 22,000 kg/day 40 – 60 HP
ASE-PD-100 Twin / Quad 80 – 120 m² 1,000 – 1,600 kg/hr 25,000 – 41,000 kg/day 75 – 100 HP
ASE-PD-200+ Heavy Quad 150 – 240+ m² 1,900 – 3,200+ kg/hr 48,000 – 82,000+ kg/day 125 – 200 HP
METALLURGY & CORROSION SELECTION

Material of Construction (MOC) Matrix

Alloy Grade Recommended Effluent / Cake Duty
SS 304 / 304L Municipal STP sewage sludge, food/dairy biological sludge, neutral paper bio-cake.
SS 316 / 316L Chemical intermediates, pharmaceutical API ETP sludge, textile dyeing CETP cakes.
Duplex 2205 High-chloride ZLD brine/MEE/ATFD salts and aggressive chemical slurries (pitting resistance).
Carbon Steel (IS 2062) Non-corrosive mineral slurries, oil-field drilling muds, and dry boiler ash conditioning.
THERMAL UTILITY OPTIONS

Steam vs. Thermic Fluid Comparison

Feature Saturated Steam Thermic Fluid (Hot Oil)
Operating Temp 140°C – 185°C (4–10 kg/cm²) 200°C – 300°C (Low pressure)
Heat Transfer High condensing latent heat Sensible heat; higher temperature delta
Best Application Plants with spare boiler or turbine bleed steam High-boiling organic cakes or zero boiler sites
Design Standard Rotary joint + ASME/IBR jacket test High-temp thermal oil seals + expansion tank
CUSTOM ENGINEERING

Request Paddle Dryer Sizing & GA Drawing

Every sludge cake differs in viscosity, chloride levels, and particle transition. Submit your sludge profile below or ship a 25–50 kg drum to our Ahmedabad works for live validation.

Single-shaft vs Twin-shaft Hollow Paddle Dryer?
Twin-shaft dryers provide counter-rotating self-cleaning intermeshing blades ideal for sticky ETP/STP sludge, while single-shaft paddle units suit free-flowing powders or low-adhesion pastes.
Do you supply complete auxiliary skids (feeder, scrubber, condenser)?
Yes. AS Engineers delivers complete battery-limit packages including hopper screw feeders, dust cyclones, vapor condensers, wet odor scrubbers, and PLC/VFD control panels.
What is the typical delivery lead time?
Depending on capacity and Duplex/SS316L alloy procurement, standard fabrication and factory hydro-testing take 8 to 14 weeks from GA drawing approval.

Paddle Dryer Technical Inquiry